Restaurant MEPF Design, Standalone & Fit Out
Mechanical, Electrical, Plumbing, and Fire Protection engineering for restaurant developments from ground up buildings to fit outs inside existing commercial spaces.
828 Engineering Services provides comprehensive MEPF (Mechanical, Electrical, Plumbing, and Fire Protection) engineering design for restaurant developments in the Philippines, covering both standalone buildings and commercial fit out spaces from kitchen exhaust and equipment power to grease plumbing and kitchen fire suppression.
Restaurants Live or Die on Their Systems
Undersized kitchen exhaust makes dining rooms smoky. Underpowered panels trip during the dinner rush. Grease lines clog. A restaurant’s MEPF systems are its operating backbone and they demand a designer who has drawn them dozens of times.
Our team has delivered 33 KFC stores and 7 Tokyo Tokyo stores in both standalone and interior fit out formats, plus multiple coffee shop stores. We know what brand operators, landlords, LGU reviewers, and fire inspectors each expect and design for all four at once.
Standalone Buildings vs Fit Out Projects
| Standalone Buildings | Commercial Fit-Out | |
|---|---|---|
|
Scope |
Complete MEPF from utility connections and site infrastructure to internal building systems |
Design, assessment, and integration of MEPF systems within an existing commercial space |
|
Key deliverables |
Site Development Plans, Load Schedules, Schematic Designs, full MEPF drawing sets |
Fit-out MEPF drawings coordinated with landlord provisions and base-building systems |
|
Critical checks |
Utility capacity, site drainage, service entrance design |
Landlord provision compatibility, tenant design criteria, regulatory compliance |
|
Best for |
Drive-thru and freestanding stores, pad sites |
Mall, retail podium, and commercial building locations |
Discipline by Discipline Scope
Mechanical
- Air conditioning and ventilation for dining and kitchen areas
- Kitchen exhaust and fresh air systems
- Equipment ventilation and heat rejection
- Mechanical load calculations and analysis
- Mechanical layouts and schematics
Electrical
- Kitchen equipment power layouts
- Power distribution and emergency systems
- Panel board schedules and single-line diagrams (SLDs)
- Grounding and lightning protection
- Auxiliary systems coordination CCTV, data, audio, POS
Plumbing
- Water supply and hot water systems
- Sanitary and wastewater systems
- Grease and kitchen plumbing
- Storm drainage
- Plumbing riser diagrams and calculations
Fire Protection
- Automatic sprinkler system design
- Portable fire extinguisher layout
- Kitchen fire suppression coordination
40 Stores. Two Brands. One Team.
The strongest evidence we can offer a restaurant operator: a rollout program of 33 KFC and 7 Tokyo Tokyo stores delivered across standalone and fit out formats standardized for speed, adapted per site.
Services Behind This Sector
- Mechanical & HVAC Design – kitchen exhaust, fresh air, ACMV
- Electrical Design – equipment power, SLDs, auxiliary systems
- Plumbing & Sanitary Design – grease and kitchen plumbing
- Fire Protection Design – sprinklers and kitchen suppression
- Cost Estimation & QTO – store budget control
Restaurant MEPF Questions, Answered
What is the difference between standalone and fit-out restaurant MEP design?
Standalone projects cover complete MEPF from utility connections and site infrastructure to internal building systems, including site development plans, load schedules, and schematic designs. Fit-out projects focus on the design, assessment, and integration of MEPF systems within an existing commercial space working with the landlord’s provisions rather than building from the ground up.
Do you review landlord provisions before fit-out design starts?
Yes. For fit-out projects we assess the landlord’s provided electrical capacity, ventilation allowances, plumbing tie-in points, and fire protection provisions, then design your kitchen and dining systems to be fully compatible — flagging any capacity shortfalls before they become construction problems.
How long do restaurant MEP permits take in the Philippines?
Permit timelines vary by LGU, but a complete, code-compliant drawing set is the single biggest factor in avoiding delays. Our packages include the load schedules, single-line diagrams, and fire protection documents reviewers expect, which keeps back-and-forth to a minimum. Typical building and fire permit reviews run several weeks to a few months depending on the city.
Can you handle a multi-store restaurant rollout?
Yes — it’s one of our sharpest specialties. Our team has delivered 33 KFC stores and 7 Tokyo Tokyo stores across standalone and interior fit-out formats, using standardized design templates adapted to each site for speed and consistency.
Do you design kitchen fire suppression systems?
We coordinate kitchen hood fire suppression with the kitchen equipment layout, exhaust design, and the building’s sprinkler system — a scope item fire inspectors examine closely in restaurant projects.
Opening or rolling out restaurants?
Send us your site plan or lease outline drawings and get a fee proposal within 48 hours single store or full rollout program.
Or call +63 960-420-9863
Contact Us
Reach Out to Us
We’d like to listen and find out what you’re looking for and what your challenges are. To get started, fill out the form, we respond to proposal requests within 48 hours.
Get in Touch
19 Magsaysay St., Parang, Marikina City, Metro Manila,
Philippines 1809
Phone: +63 960-420-9863
Email: info@828engineering.com